Nellers2001: JDM 2.2 vtec Prelude

Nos buttons better work yoh!!! lol

Nice though

Cheers!

They're not NOS though, it's the buttons for cruise control. Removing the cruise only saves about 2 kilos so not worth removing as it's handy and there is no other way to keep the controls for it unfortunately!

The buttons are seperate to the wheel and do cruise control

Well...I have actually taken a backwards step in progress (is that even possible?)!!

After spending around £60 not long ago on new gaskets to cure minor oil leaks I then started a whole new leak from the sandwich plate on a blanking plug, and also from the oil pressure t-piece I installed! I decided that I don't have enough time to sort it properly so removed the sandwich plate and temp sensor, and removed the braided line and t-piece for the pressure sensor and put it all back to stock so I don't have an oil leak for Donnington!

I also found that going over a speedbump had ripped the exhaust wrap on the bottom of the manifold so I had to remove the damaged bit and patch it up with new exhaust wrap.

That used the total of the only 3 hours I have available to spend on the car this month and last!

nellers2001 wrote:

That used the total of the only 3 hours I have available to spend on the car this month and last!

Im sure there will be times in the future you can work on the lude..... :-D

Well unfortunately more bad news!! Still have zero time after work/refurbing the house/baby and the lude is definately being sold now so can't find any time to really work on it.

I got round to fixing the water leak from the drain plug washer on the ally rad by removing the rad and re-installing the old rad back in. Couldn't find any rubber washers to seal it properly so will have to get onto japspeed!!

I also decided I had to empty the garage and repack it as need to fit some furniture in there too. I couldn't quite believe how many spares I have, and these pictures aren't even all of it!!

n/s and o/s front suspension including hubs/disk/calipers etc:


Rear stuff including subframe, two sets hubs/disks/arms etc/calipers so on:


Spare import 2.2 engine/rocker cover/head under the rocker cover:




Gearbox:


Roof and lining from a non-sunroof prelude:


Track wheels with r888's:


More spares including a bonnet/manifold/cat/steering wheels/lights/clutch lines/ally rad/box of front calipers, bolts etc etc/splitter/sandwich plate/adapters so on:

Just need the new owner to hurry up and buy it now and take all my spares to clear half a garage!!!!

Once sold I will still be around, not partaking in track days unfortunately but will still be able to come to jap shows!!

Boo! Boo! and more Boo!

You will still be doing track days

Car now gone to my little bro! Miss it already...

Well the hunt for the replacement begins....

Ah so thats why he has vtec now lol.

Gutted, what you looking to replace it with?

Looking at getting a lwb mitsubishi Shogun/Pajero in either 3.0 v6 or 3.5 v6 guise. Do a little off-roading, good for the winter, plenty of room for the little'un and future little'uns and well...something different!

Quarry

New owner... = Love!